With a round tummy area, I often have a problem that my shorts and trousers are too small around the waist. These shorts are not too bad when I am standing up but when I sit down the button flies off, even when I have sewn it on securely. With the hot weather we have been having I needed to make these shorts fit more comfortably. Here is what I did…
In a previous post, I cut the elastic off some worn out men’s boxer shorts. I still have quite a bit of the elastic left. I cut two pieces each measuring 6cm in length. Leaving the width as it is (it will fray if cut).
On the front of the shorts, the waistband had a stitched side seam. This was easy to unpick with some sharp scissors and an unpicker (seam ripper). I unpicked both sides.
I wasn’t able to unpick the waistband on the reverse as it was one piece of fabric. So I cut it with some sharp scissors down just past the line of stitching.
I inserted one piece of the elastic under the channel of the waistband and pinned in place. I repeated this with the other end of the waistband and made sure it lay flat before pinning. Using a zig zag stitch on my sewing machine I stitched down over the raw edge of the waistband side seam, incorporating the elastic. Zig zag stitch is useful for elastic and stretch fabric as it stretches with the elastic. I used a regular running stitch along the bottom edge of the waist band to re-fix the area I had cut.
I then repeated this for the other side of the waistband. So that I had two pieces of elastic inserted on each side of the waist of the shorts. If you don’t have a sewing machine you can replicated the zig zag stitch by hand. It is best to use a thimble as it is a lot of fabric to get through and will make your fingers sore otherwise.
My last job was to sew the button on. I had lost the original button, so I chose one from my spare button jar. Before I sewed the button on, I checked it fitted through the button hole and was large enough to hold the thick fabric of the waistband. Watch our video on how to sew on a button. If you need some odd buttons for your collection, we sell a pack on our Etsy shop.
I can now comfortably sit down in my shorts with the button safely in place and they are more comfortable to wear. An alternative way to fix a waistband is to change it completely. In this how to blog post I replace the waistband of some pyjama bottoms. The same technique can be used for any shorts, trousers or skirts.
Need help with your repairs? Why not join our next virtual zoom mending session on 14th September 2020. Sign up to our newsletter for more details.